1. Toyota Genuine Manual Transmission Gear Oil Lv Part Numbers
2. Toyota Genuine Manual Transmission Gear Oil Lv Part Number Lookup
3. Toyota Genuine Manual Transmission Gear Oil Lv Part Number 1
4. Toyota Genuine Manual Transmission Gear Oil Lv Part Number List

Count on us for a full diagnosis to repair your engine, components or chassis and be assured of reliable service and warranty. for workmanship and Toyota Genuine Parts.All Toyota Genuine Parts come with a 12-month or 20,000 km warranty, whichever comes first. Notes: (1) Depending on the particular characteristics of the gear oil used, or the operating conditions, idle sound, shift feeling and or fuel efficiency maybe different or affected. Use Toyota Genuine Manual Transmission Gear Oil LV to achieve optimal performance. Capacities: EC65 (6-SPD) 5.1 pints.

1. Jul 03, 2014  Toyota Genuine Parts Differential Gear Oil is the exact original equipment manufacturer (OEM) fluid that your vehicle came with. When you select a genuine OEM fluid, you can rely on the high quality and effectiveness of the product and brand without having to guess if the product will work in sequence with your vehicle.
2. Manual Transmission Fluid Application Guide. 12345577 as well as Chrysler part number 4874464 Part# 811095 SynPower 75w90 Gear Oil: Valvoline SynPower Full Synthetic Gear Oil. Formulated for ultimate protection and performance. A thermally stable, extreme-pressure gear lubricant, it.

*: The engine oil capacity is a reference quantity to be used when changing the engine oil. Warm up and turn off the engine, wait more than 5 minutes, and check the oil level on the dipstick.

■ Engine oil selection

“Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the following grade and viscosity.

Oil grade: ILSAC GF-5 multigrade engine oil

Recommended viscosity: SAE 0W-20
SAE 0W-20 is the best choice for good fuel economy and good starting in cold weather.

If SAE 0W-20 is not available, SAE 5W-20 oil may be used. However, it must be replaced with SAE 0W- 20 at the next oil change.

Oil viscosity (0W-20 is explained here as an example):

• The 0W in 0W-20 indicates the characteristic of the oil which allows cold startability. Oils with a lower value before the W allow for easier starting of the engine in cold weather.

• The 20 in 0W-20 indicates the viscosity characteristic of the oil when the oil is at high temperature. An oil with a higher viscosity (one with a higher value) may be better suited if the vehicle is operated at high speeds, or under extreme load conditions.

How to read oil container label The International Lubricant Specification Advisory Committee (ILSAC) Certification Mark is added to some oil containers to help you select the oil you should use.

Cooling system

Ignition system

NOTICE

■Iridium-tipped spark plugs

Use only iridium-tipped spark plugs. Do not adjust spark plug gap.

Electrical system

Manual transaxle

NOTICE

■Manual transmission gear oil

Please be aware that depending on the particular characteristics of the gear oil used or the operating conditions, idle sound, shift feeling and/or fuel efficiency may be different or affected. Toyota recommends to use “TOYOTA Genuine Manual Transmission Gear Oil LV” to achieve optimal performance.

Automatic transaxle

NOTICE

■Automatic transmission fluid type

Using automatic transmission fluid other than “Toyota Genuine ATF WS” may cause deterioration in shift quality, locking up of your transmission accompanied by vibration, and ultimately damage the transmission of your vehicle.

Continuously variable transaxle

*: The fluid capacity is a reference quantity.

If replacement is necessary, contact your Toyota dealer.

NOTICE

■Continuously variable transaxle fluid type

Using continuously variable transaxle fluid other than “Toyota Genuine CVTF FE” may cause deterioration in shift quality, locking up of the transmission accompanied by vibration and, ultimately, damage to the vehicle’s transmission.

Clutch

Brakes

Toyota Genuine Manual Transmission Gear Oil Lv Part Numbers

*1: Minimum pedal clearance when depressed with a force of 66 lbf (294 N, 30 kgf) while the engine is running *2: Parking brake lever travel when pulled up with a force of 44 lbf (200 N, 20 kgf)

Steering

Tires and wheels

► Type A

Toyota Genuine Manual Transmission Gear Oil Lv Part Number Lookup

► Type B

► Type C

Toyota Genuine Manual Transmission Gear Oil Lv Part Number 1

Light bulbs

A: HB3 halogen bulbs
C: Wedge base bulbs (amber) E: Double end bulbs
B: Wedge base bulbs (clear) D: H16 halogen bulbs

*: If equipped

Other materials:

Inspection procedure
Hint: if dtcs p0115, p0116, p0117, p0118 and p0125 are output simultaneously, the engine coolant temperature sensor circuit may be open or short. Perform the troubleshooting of dtc p0115, p0117 or p0118 first. Read freeze frame data using the hand-held tester or the obd ii scan to ..

Toyota Genuine Manual Transmission Gear Oil Lv Part Number List

Terminals of ecu
1. Inspect tvip ecu Inspect the ecu–b, dome and ecu–ig fuses. disconnect the tvip ecu connector, and the continuity and voltage of check each terminal of the disconnected connector. Standard: If the result is not as specified, the vehicle’s side may malfunction. Reconnect ..

Overhaul
1. Remove cylinder block water drain cock sub–assy Remove the cylinder block water drain cock from the cylinder block. 2. Inspect connecting rod thrust clearance Using a dial indicator, measure the thrust clearance while moving the connecting rod back and forth. Standard thr ..